杨洋，女，博士，副教授，广东工业大学“青年百人计划”A类引进人才。目前担任广东省大湾区激光与增材制造产业技术创新联盟副秘书长，广东省生物医学工程学会医疗器械分会委员，广东省精准医学分会医工结合分会常务委员，“汉邦科技-广工大金属增材制造技术联合研发中心”主任，中国机械工程学会高级会员、中国生物材料学会会员。
多次受邀参加国内外相关会议与论坛并进行口头报告，主要包括医疗器械论坛，4D打印技术论坛，中国生物材料大会，增材制造青年科学家论坛，国际快冷与亚稳材料会议，法日双边无机与环境材料研讨会等。迄今为止发表SCI高水平论文30余篇，主持或承担多项国家级和省部级科研项目，包括“国家自然科学青年基金”、“深圳市基础研究自由探索项目”、“国家重点研发计划-低模量高强度亲水牙种植体系统研发”、“上海光源开放课题”、“中国散裂中子源合作项目”等。主讲《机械制造基础》、《工程材料》和《3D打印技术原理与实践》等课程。
Ø 2011-2015：法国雷恩国立应用科学学院，冶金化学系, 博士研究生.
Ø 2008-2011：中国科学院金属研究所，钛合金研究部，硕士研究生.
Ø 2004-2008：中南大学，材料科学与工程学院，学士.
研究方向
Ø 微创医疗器械设计与制造.
Ø 激光增减材在线检测研发
Ø 智能化增材制造金属材料
Ø 同步辐射和中子衍射等大科学装置在制造与材料研究中的应用.
Ø 增材制造医疗器械的研发与产业化.
[1] Nano-precipitation leading to linear zero thermal expansion over a wide temperature range in Ti22Nb，H. Wang, D.K.Z. Lai, J. Xu, W. Yin, C. Song, Y. Zhao, Y. Yang, M. Bonisch, Z. Sun, Scripta Materialia, 2021, 205: 114222. （SCI收录，IF=5.611，JCR一区，Top 期刊）
[2] 基于超声声速法的镍基单晶材料晶体取向评价, 张晨昕, 姚松, 李雄兵*, 杨洋, 韩军, 航空学报, 2022; 43: 425431. （EI收录）
[3] Graded functionality obtained in NiTi shape memory alloy via a repetitive laser processing strategy; Y. Yang, Z.G. Wu, B.Y. Shen, M.Z. Wu, Z.S. Yuan, C.Y. Wang*, L.C. Zhang*, Journal of Materials Processing Technology, 2021; 296: 117177. （SCI收录，IF=5.551，JCR一区，Top 期刊）
[4] Plastic deformation via hierarchical nano-sized martensitic twinning in the metastable b Ti-24Nb-4Zr-8Sn alloy, Y. Yang, P. Castany*, Y.L. Hao, T. Gloriant, Acta Materialia, 2020; 194: 27~39. （SCI收录，IF=8.203，JCR一区，Top 期刊）
[5] Functionally graded NiTi alloy with exceptional strain-hardening effect fabricated by SLM method; Y. Yang*, J.B. Zhan, J.B. Sui, C.Q. Li, K. Yang, P. Castany, T. Gloriant, Scripta Materialia, 2020; 188: 130~134.（SCI收录，IF=5.611，JCR一区，Top 期刊）
[6] Prewetting Polypropylene-Wood Pulp Fiber Composite Nonwoven Fabric for Oil–Water Separation, Z. Yuan*, Z. Ke, Y. Qiu, L. Zheng, Y. Yang, Q. Gu, C. Wang*, ACS Applied Materials & Interfaces, 2020; 12: 46923-46932. （SCI收录，IF=9.299，JCR一区）
[7] Evolution of functional properties realized by increasing laser scanning speed for the selective laser melting fabricated NiTi alloy, Y. Yang*, J.B. Zhan, Z.Z. Sun, H.L. Wang, J.X. Lin*, Y.J. Liu, L.C. Zhang, Journal of Alloys and Compounds, 2019; 804: 220~229. （SCI收录，IF=5.316，JCR一区，Top 期刊）
[8] Experimental investigation on the deformation behaviors of Ti-6Al-4V sheet in electropulsing-assisted incremental forming, D.W. Ao, X.R. Chu*, Y. Yang, S.X. Lin, J. Gao, International Journal Advanced Manufacturing Technology, 2019; 104, 4243-4254.（SCI收录，IF=2.925，JCR二区）
[9] Laser beam energy dependence of martensitic transformation in SLM fabricated NiTi shape memory alloy; Y. Yang, J.B. Zhan, B. Li, J.X. Lin*, J.J. Gao, Z.Q. Zhang, L. Ren, P. Castany, T. Gloriant*，Materialia, 2019; 6: 100305. （SCI收录，IF=None）
[10] 冷却速率对TC16钛合金显微组织和力学性能的影响; 张志强; 董利民; 胡明; 雷晓飞; 杨洋; 杨锐*; 中国有色金属学报, 2019; 29: 1391-1398. （EI收录,)
[11] Stress release-induced interfacial twin boundary ω phase formation in a β type Ti-based single crystal displaying stress-induced α” martensitic transformation; Y. Yang, P. Castany, E. Bertrand, M. Cornen, J.X. Lin*, T. Gloriant*, Acta Materialia, 2018; 149: 97~107. （SCI收录，IF=8.203，JCR一区，Top 期刊）
[12] Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg; Y.J. Liu, Z. Liu, Y. Jiang, G.W. Wang, Y. Yang*, L.C. Zhang*, Journal of Alloys and Compounds, 2018; 735: 1414-1421. （SCI收录，IF=5.316，JCR一区，高被引，TOP期刊）
[13] Effect of thermal treatment and fluoride ions on the electrochemical corrosion behavior of selective laser melted CoCrW alloy; Y.J. Lu, S. Guo, Y. Yang*, Y.J. Liu, Y. Zhou, S.Q. Wu, C.Q. Zhao, J.X. Lin*, Journal of Alloys and Compounds, 2018; 730: 552-562.（SCI收录，IF=5.316，JCR一区，Top 期刊）
[14] CoCrWCu alloy with antibacterial activity fabricated by selective laser melting: Densification, mechanical properties and microstructural analysis, Y.J. Lu, L. Ren*, S.Q. Wu, C.G. Yang, W.L. Lin, S.L. Xiao, Y. Yang*, K. Yang, J.X. Lin*, Powder Technology, 2018; 325: 289~300.（SCI收录，IF=5.136，JCR一区，TOP期刊）
[15] The effect of 3 wt.% Cu addition on the microstructure, tribological property and corrosion resistance of CoCrW alloys fabricated by selective laser melting, J.S. Luo, S.Q. Wu, Y.J. Lu, Y. Yang, J.X. Lin*, Journal of Materials Science in Medicine, 2018; 29: 37. (EI, JCR二区TOP) （SCI收录，IF=2.489，JCR二区）
[16] Effect of Cu on microstructure, mechanical properties, corrosion resistance and cytotoxicity of CoCrW alloy fabricated by selective laser melting, Y.J. Lu, L. Ren*, X.C Xu, Y. Yang, S.Q. Wu, J.S. Luo, M.Y. Yang, L.L. Liu. D.H. Zhuang, K. Yang, J.X. Lin*, Journal of Mechanical Behavior of Biomedical Materials, 2018; 81: 130-141. （SCI收录，IF=3.372，JCR二区）
[17] Effect of electropulsing treatment on microstructure and mechanical behavior of Ti-6Al-4V alloy sheet under argon gas protection, D.W. Ao, X.R. Chu*, Y. Yang, S.X. Lin, J. Gao*, Vacuum, 2018; 148: 230-238. （SCI收录，IF=2.906，JCR二区）
[18] Effect of electropulsing on springback during V-bending of Ti-6Al-4V titanium alloy sheet, D.W. Ao, X.R. Chu*, Y. Yang, S.X. Lin, J. Gao, International Journal Advanced Manufacturing Technology, 2018; 96: 3197-3207. （SCI收录，IF=2.925，JCR二区）
[19] Hot Tensile Behaviors and Microstructure Evolution of Ti-6Al-4V Titanium Alloy Under Electropulsing, D.W. Ao, X.R. Chu*, S.X. Lin, Y. Yang, J. Gao, Acta Metallurgica Sinica-English Letters, 2018; 31: 1287-1296. （SCI收录，IF=2.090，JCR二区）
